| 1. | Study on conical basket centrifuge of double - cone angles
双锥度锥篮离心机的研究 |
| 2. | Transitional section cone angle design of emp simulator
电磁脉冲模拟器前后过渡段锥角设计 |
| 3. | Reference cone angle
分度圆锥角 |
| 4. | Pitch cone angle
节圆锥角 |
| 5. | Loss cone angle
损失锥角 |
| 6. | For impacting on ceramic plate formation mechanism of smash cone angle is investigated
(三)研究了冲击载荷作用下陶瓷面板破碎锥角的形成机理。 |
| 7. | In this case , the z - rotation of the scope geometry is used to drive the cone angle on the spot light
在材质网络里的两个节点是一个简单的例子，去显示无材质的节点如何用于驱动一个渲染效果。 |
| 8. | The effects of r / h ratio , l / r ratio and cone angle on the dynamic response of the conical shells are discussed in this section
分析了圆锥壳结构的径厚比、长径比及锥角变化对结构应力响应的影响。 |
| 9. | Abstract : this paper analyzes theoretically the effect of the reversed cone angle and length of the plug on restraint and elimination to the distortion of the internal spiral ribs , and put forth the design methods of the plug in drawing rifled tube
文摘:从理论上分析了芯棒倒锥角和芯棒长度对内螺旋凸筋形状畸变的抑制和消除作用，提出了采用倒锥形等螺距芯棒拉拔内螺纹管时芯棒几何参数的设计方法。 |
| 10. | The paper deduced the seal torque of the tri - eccentric butterfly valve and gave it a qualitative analysis . the results indicated : for the tri - eccentric butterfly valve with the same caliber , theseal torque would decrease with the butterfly disc thickness increasing ; the seal torque would increase with the radial eccentricity increasing ; however , the axis eccentricity effected on the seal torque minutely ; the seal torque would increase with the half cone angle increasing appreciably of the cone which the butterfly disc belonged to
本文还对三偏心蝶阀的密封力矩作了推导并进行了定性的分析，结果表明，对于同一口径的三偏心蝶阀，密封力矩与蝶板的厚度近似成反比；与径向偏心距近似成正比，变化也很明显；而轴向偏心距对密封力矩的影响不是很大；密封力矩随着蝶板所在的圆锥半锥角的增大而有所增加。 |
